Filter
Top Products
37
Barcelona RCM 104A
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
PTY priority
When PTY is activated, the system will con-
stantly search for the corresponding program
type within the station network of the recei-
ved program.
If you listen to NDR2, for example, the set will
also search through the other NDR programs
to find out whether there is a program offering
the desired PTY.
During radio operation, as soon as such a
program begins the unit will switch over to
this program for the duration of the corre-
sponding broadcast.
During tape or CD operation, the system will
release a BEEP and display the program
type in order to let you know that a program
offering the desired PTY has started.
• If you wish to listen to this program,
press SRC to switch to radio operation.
Note:
As mentioned before, the PTY function is
presently not available with all RDS stations.
Station naming
Using the ST NAME item of the DSC menu
you can enter a name with a maximum of 8
digits for all stored frequencies of memory
banks I and II.
Most of the FM stations are RDS stations, the
names of which will be shown in the display.
The displayed RDS name has priority over all
entries specified by the user. If you have
named an RDS station, this name will only be
shown briefly and be replaced by the RDS
name afterwards.
For this reason we recommend that you only
name non-RDS stations, which only show
their frequency but not the name.
All long-wave stations are provided with a
station name at the factory.
To start your entry:
• Choose a station,
• press DSC,
• select item “ST NAME” with rocker
switch
/ and
• press -dB.
The first position is flashing.
• Now select a character with rocker
switch
/ .
You have the choice between the capital
letters (A-Z), special characters and the
numbers (0-9).
b) Using the << >> rocker switch
If PTY is switched on, you can select a
program type via the << >> rocker
switch.
• Press << or >>. The PTY selected
last will be displayed for three se-
conds.
• During this period choose the desi-
red program type with << (back-
wards) or >> (forwards direction).
• Press << or >> as many times as
required.
Tuning into a station with PTY
You may let the system find you the stations
offering the adjusted program type using the
seek tuning rocker switch or the PS (SCAN)
button.
Precondition: “PTY” must be illuminated on
the display.
• Press <<>> or PS.
Seek tuning will stop at the first station offe-
ring the desired PTY.
If you have pressed PS (SCAN), the stations
received will be scanned once until you
switch SCAN off again (press PS once
again).