Filter
Top Products
Barcelona RCM 104A
30
@ Eject button
Press .
A Cassette loading slot
Insert tape (side A or 1 facing up, the
open side showing to the right).
B Tape side selector
Press
to switch over during tape
operation. The display shows “TR 1”
(track) or “TR 2”.
C MIX
see chapter “CD changer control”.
D BLS (Blank Skip)
Use this function to skip blank sections
of the tape.
As soon as an unrecorded portion of
more than 15 seconds is detected du-
ring playback, the system will automati-
cally forward the tape to the beginning
of the next title.
In this case, the display will show
“CPS-FF”.
To switch BLS on/off: Press the BLS
button.
When the function is active, “BLS” will
light up in the display.
E lo
To change the seek tuning sensitivity.
lo lit up in the display indicates normal
seek tuning sensitivity (the system will
only pick up powerful nearby stations).
lo off indicates high seek tuning sensiti-
vity (the system will also pick up wea-
ker stations).
To change the seek tuning sensitivi-
ty: Press lo.
Using DSC it is possible to preset the
seek tuning sensitivity for local (“S-LO”)
and distant reception (“S-DX”). For
more information read chapter “DSC
programming”.
F DSC (Direct Software Control)
Use the DSC function to adapt a num-
ber of programmable basic settings to
suit your listening preference. For more
information, read through chapter “DSC
programming”.
G LD (loudness)
Use this function to boost the low fre-
quencies for more bass, especially at
low volume levels.
To switch LD on/off: Press the button.
When the loudness function is activa-
ted, the display shows “LD”.
For more information, see chapter
“DSC programming”.
H AUD
To adjust the treble and bass frequen-
cies using the rocker button.
Treble
+
Bass
Bass
Treble
+
The last setting will be automatically
stored.
If the setting remains unchanged within
8 seconds, the display will switch back
to the previous indication.