Blaupunkt RCM 104 A Car Stereo System User Manual


 
41
Barcelona RCM 104A
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
TIM is deactivated (TIM OFF), if the
motor antenna is retracted as soon as
the set is turned off.
You can now drive through a car wash
when the radio is off.
Do not switch on the radio until you have left
the car wash.
If the display shows TIM ON when switching
off the radio, then the TIM timer is activated.
The motor antenna will remain extracted.
If you are sure,
that now and while being in the car wash you
are outside the recording period around the
adjusted TIM-TIME:
1.5 hours
The motor antenna
will be extracted
start
adjusted
TIM-TIME
end
1.5 hours
Switch off the radio and press TIM.
The display briefly shows STBY OFF.
The antenna will then remain retracted when
the radio is turned off (until the three-hour
recording period starts).
Attention:
You should by all means deactivate the
TIM timer (TIM OFF), if the adjusted re-
cording period is soon to start.
For this purpose:
Press DSC with the radio being activa-
ted.
Use the
/ rocker button to select the
item TIM TIME.
Press -dB and switch to TIM OFF with
rocker button
/ (you find this item
between the time settings for 23:00 and
0:00).
If you now turn off the radio, the anten-
na will be retracted.
You can now drive into the car wash. After
you have left the car wash, you may re-
activate the TIM function according to your
preference.
RT – Radiotext
Radiotext is an RDS feature used by the
broadcasters to transmit texts.
The texts can be displayed in two subse-
quent lines with a maximum of 64 characters
each, which are moved through the display
slowly.
Depending on the individual broadcaster,
these texts can be of a different nature, for
example brief news, program information,
commercial broadcasts, etc.
For safety reasons, the radiotext function can
only be used if the ignition is switched off.
When activating RT with the ignition being
switched on, the message “NO TEXT” will
appear in the display.
To read radiotext messages, proceed as
follows:
Park the vehicle in a suitable place and turn
off the ignition. The radio will be switched off
automatically.
In order to re-activate the car radio,
press the ON button for about 1 se-
cond.
Select a station and press RT.
It takes some time until the aired messages
are fully available in the system. In the mean-
time, the radio will display the message
“WAIT”.
Afterwards, the text will be displayed.
If the adjusted station does not provide radio-
text information, the message “NO TEXT” is
displayed.
To switch off radiotext:
Press the RT button once again.