Filter
Top Products
Barcelona RCM 104A
38
• Use the rocker switch << >> to move to
the next position and select a charac-
ter.
In this way, up to 8 characters can be en-
tered.
Once you have completed the name as desi-
red,
• press -dB;
now the entry has been stored.
The display returns to “ST NAME”.
To name the next station:
• Select it with one of the preset buttons
(1-6); if required, change the memory
bank and/or waveband.
Then start to enter the next name.
To finish the entry,
• press DSC.
You will leave the DSC menu at the
same time.
Any name entered for a preset station will be
deleted by re-assigning it (either with a name
or frequency).
Warning beep
If you leave the reception area of the traffic
program station you are currently listening to,
you will hear a warning beep after approxi-
mately 30 seconds.
This warning beep will also be released when
pressing a preset without a traffic program.
Switching the warning beep off
a) Tune to another traffic program station:
• Press the rocker switch, or
• press a preset button with a station
offering traffic information.
Alternative:
b) Switch off the priority for traffic an-
nouncements:
• Press TIM > 2 sec.
In the display, the “TA” indication
goes out.
You can reduce the beep tone volume to
the pre-selected mute volume.
• For this purpose, press -dB.
Reception of traffic announcements with RDS-EON
(Enhanced Other Networks)
Many FM broadcasters provide their service
area with traffic messages at regular inter-
vals.
All traffic program stations transmit a special
telegram signal alongside their programs,
which is recognised and decoded by the car
radio.
As soon as such a signal is received, the
display shows “TP” (Traffic Program).
Other radio stations do not actually air traffic
announcements themselves, but by using
RDS-EON they make it possible to receive
the traffic announcements of another station
within the same radio network. In this case,
“TP” will light up in the display as soon as the
priority for traffic announcements is activa-
ted. The display must then show “TA”.
If a traffic announcement is broadcast, the
radio will automatically switch to the linked
traffic program for the duration of the messa-
ge and return to the original program after the
end of the message.
Traffic announcement priority
on/off
If the priority for traffic announcements is
activated, “TA” will appear in the display. To
switch the function on/off:
• Press the TIM button > 2 sec.