Filter
Top Products
Barcelona RCM 104A
44
DSC programming
Using DSC (Direct Software Control), you
can adjust certain settings and functions for
this car radio to your own liking and then store
them.
The basic settings for this audio equipment
have been made at the factory. Please refer
to the following overview for these settings so
that you can always reset to these if desired.
If you wish to alter any of the programming,
• press button DSC.
Use the rocker switch and the -dB button to
make your selection from the following
functions and to carry out the desired adjust-
ments. The current setting for that function
will appear in the display.
Select function
Set
value
Select function
Set
value
TIME The current time will be dis-
played, or it has to be adju-
sted.
Use the rocker button << >>
to select the hours or minu-
tes (flashing), and the
/
switch to set the time. Start
with -dB. The precise time
setting is required for the
proper operation of TIM.
CDC NAME (only if changer is connec-
ted)
Use this function to name
your discs (see also CD
changer control, “Entering/
displaying CD names“)
ADA To switch the ADA system
on/off and to test the anten-
nas.
Use the <<>> rocker switch
to activate one of the follo-
wing modes: ADA OFF, ANT
1 X, ANT 2 X, ADA ON X.
The “X” stands for a number
between 0 and 9, depending
on the intensity of the anten-
na signal.
Test
If the antenna signal intensi-
ty between ANT(enna) 1 and
ANT 2 still varies strongly
even after having changed
the vehicle position (by
metres), you should have the
antenna furnishing the wea-
ker signal checked.
ADA ON/OFF
Normal setting: ADA ON.
If only one antenna is con-
nected, you should adjust
ADA OFF.
ANGLE Use one of the values -1, 0,
or +1 to adapt the individual
viewing angle.
Adjust the ANGLE so as to
provide the best view.
BAS F=R To distribute the bass level
among the front and rear
speakers between +6 dB
front and +6 dB rear.
TRE F=R To distribute the treble level
among the front and rear
speakers between +6 dB
front and +6 dB rear.