Clarion NX404 Car Video System User Manual


 
29
NX404
English
English
Owner’s Manual
English
Owner’s Manual
11. iPod OPERATIONS
iPod/iPhone can be connected by using the
connector cable supplied with the iPod/iPhone, but in
this case, you can enjoy its audio sound only. To enjoy
video movies stored in the iPod/iPhone with video
displaying them on this unit, it is required to use the
special connector cable (CCA-750) separately sold.
However the new products such as iPhone 5, iPhone
5s and iPhone 5c, iPod touch
®
(5th generation) and
iPod nano
®
(7th generation) only can connect 10-pin
cable (no video signal output),so these new products
cannot display video in video mode.
Note:
• This system will not operate or may operate improperly
with unsupported versions.
• For detailed information on the playable iPod/iPhone
models, see our home page: www.clarion.com
Notes on using iPod/iPhone
Do not connect an iPod/iPhone to this unit with a
headphone connected to the iPod/ iPhone.
After the iPod/iPhone has been connected to this
unit, the buttons of iPod are disabled for operation
in the Music mode. In the Video mode, do not
operate the buttons of iPod.
When in the iPod mode, the screen image input
from the AUX terminal, is output to the rear monitor.
When no data is present, the title display will remain
blank.
Set the language setting of iPod/iPhone to English
before connecting your iPod/iPhone. Some
characters of the other languages may not be
displayed correctly in this system.
• Precautions on battery consumption:
If the iPod/iPhone is connected to this unit when the
internal battery of iPod/iPhone has run down, this
function may not operate correctly. You must connect
the iPod/iPhone after charging the battery if it has run
down.
iPod Audio Menu Operations
Connect your iPod/iPhone to the USB connector.
The system will automatically detect the connected
device and the iPod Audio button will be enabled for
operation on the Main Menu screen.
Note:
1.This system has two USB connectors, please
connect to the USB with the label of “iPod/iPhone”.By
connecting another USB cable, iPod/iPhone can’t play
back the music.
2.When iOS device is connected via both USB and
Bluetooth at the same time and select iPod mode, iOS
device is controlled by USB connecton.
3. When the iPod mode and operate the audio player
or internet radio other than iPod, there is a case that
iPod doesn’t playback correctly. Please don’t operate
the audio payer or internet radio other than Pandora
when the Pandora mode.
4. During iOS device is connected by Bluetooth, and
select the iPod mode, the volume level is controlled by
only iOS device.
5. During iOS device is connected by Bluetooth, Album
jacket image is not displayed.
The playback starts after a while, from where the iPod/
iPhone has been paused.
When iPod/iPhone is already connected
Touch the [
] button on the Main Menu
screen. The system changes to the iPod mode, and
starts playback from the previous position.
iPod Audio ID3 Information
1 - Option button
2 - Repeat button
3 - Shufe button
4 - Previous Track /Fast Backward button
5 - Play/Pause button
6 - Next Track/Fast Forward button
7 - ID3 Information
13
5
3
6
7
21
14
1011
12
15
4
9
8