Clarion VRX6671Z Car Video System User Manual


 
18 VRX6671z
Basic Operations
When the panel is closed:
Each time you press the Z-EHCR button 9, the
tone effect changes in the following order:
Z-EHCR 1 Z-EHCR 2 Z-EHCR 3
Z-EHCR OFF Z-EHCR 1...
When the panel is open:
1. Press the A-M button & to change into the
AUDIO-MODE display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select Z-EHCR. Press the ENT at
the center of the JOYSTICK ¡ to change into
the Z-enhancer selecting display.
3. Operate the JOYSTICK ¡ upward or down-
ward to select out of:
TYPE 1” (Z-Enhancer 1) TYPE 2 (Z-En-
hancer 2) TYPE 3 (Z-Enhancer 3)
OFF (Z-Enhancer off),
and press the ENT at the center of the JOY-
STICK ¡ to set a desired Z-enhancer.
4. When the setting is finished, operate the JOY-
STICK ¡ rightward or leftward to move the
cursor to the MENU. Then press the ENT at
the center of the JOYSTICK ¡ to return to
the AUDIO-MODE display.
To return from the AUDIO-MODE display to the
STANDARD display, press the A-M button
&
once again.
Adjusting the Z-enhancer
Note:
This function is enabled only when the panel is
open.
1. Press the A-M button & to change into the
AUDIO-MODE display.
2.
Operate the JOYSTICK
¡
upward or down-
ward
to select
Z-EH LVL
level. Press
the ENT
at the center of the JOYSTICK ¡
to change
into the Z-enhancer adjusting
display
.
3. Operate the
JOYSTICK
¡ upward or down-
ward to adjust the Z-enhancer level.
When Z-Enhancer 1 is selected, you can adjust
the bass in the range of ±2.
When Z-Enhancer 2 is selected, you can adjust
the treble in the range of ±2.
When Z-Enhancer 3 is selected, you can adjust
the bass and treble in the range of ±2.
4. When the adjustment is finished, operate the
JOYSTICK
¡ rightward or leftward to move
the cursor to MENU. Then press the ENT at
the center of the JOYSTICK ¡ to return to
the AUDIO-MODE display.
Adjusting the bass and treble
Notes:
This function is enabled only when the panel is
open.
This function can be adjusted only when the Z-
enhancer is OFF.
1. Press the A-M button & to change into the
AUDIO-MODE display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select BAS/TRE. Then press the
ENT at the center of the JOYSTICK ¡ to
change into the BASS/TREBLE adjusting dis-
play.
3. Operate the JOYSTICK ¡ rightward or left-
ward to adjust the BASS or TREBLE.
4. Operate the JOYSTICK ¡ upward or down-
ward to adjust a level (adjustment range: from
-6 to 6).
5. When the adjustment is finished, operate the
JOYSTICK ¡ rightward or leftward to move
the cursor to MENU. Then press the ENT at
the center of the JOYSTICK ¡ to return to
the AUDIO-MODE display.
Adjusting the balance and fader
Note:
This function is enabled only when the panel is
open.
1. Press the A-M button & to change into the
AUDIO-MODE display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select BAL/FAD. Then press the
ENT at the center of the JOYSTICK ¡ to
change into the BAL/FAD adjusting display.
3. Operate the JOYSTICK ¡ rightward or left-
ward to select BALANCE or FADER.
4.
Operate the JOYSTICK
¡
upward or down-
ward to make an adjustment.
Adjusting range of the balance: L13 to R13
Adjusting range of the fader: front 12 / rear 12
5. When the adjustment is finished, operate the
JOYSTICK ¡ rightward or leftward to move
the cursor to MENU. Then press the ENT at
the center of the JOYSTICK ¡ to return to
the AUDIO-MODE display.