Filter
Top Products
22 VRX6671z
CD Changer Operations
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a total
of 2 changers (MD and/or CD).
Press the FUNC button 1 and select the CD
changer mode to start play. If 2 CD changers are
connected, press the FUNC button 1 to select
the CD changer for play.
∗ If “NO MAG” appears in the display, insert the
magazine into the CD changer. “LOADING” ap-
pears in the display while the player loads (checks)
the magazine.
∗ If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
CAUTION
CD-ROM discs cannot be played in the CD
changer.
Pausing play
1. Press the PLAY/PAUSE button 3 to pause
play. “PAUSE” appears in the display.
2. To resume play, press the PLAY/PAUSE but-
ton 3 again.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
Each time you press and hold the DISP button
@ for 1 second or longer, the title display changes
in the following order.
When the panel is closed:
User title (disc) ➜ CD-text title (disc) ➜ CD-text
title (track) ➜ User title (disc)...
When the panel is open:
User title (disc) ➜ CD-text title (disc & track) ➜
User title (disc)...
Note:
• If the CD playing is not a CD-text CD or no user
title has been input, “----------” appears in the dis-
play.
● Scrolling a CD-text title
When a CD-text title is longer than 16 charac-
ters (8 characters when the panel is closed), you
can scroll the display as follows.
When the panel is closed:
1. Display the CD-text title (disc or track).
2. Press and hold the BAND button % for 1 sec-
ond or longer. The titles scroll.
When the panel is open:
1. Display the CD-text title (disc & track).
2. Press and hold the TITLE button ( for 1 sec-
ond or longer to scroll the disc title.
3. To scroll the track title,
press
for 1 second or
longer
the TITLE button (
within 30 seconds
after
scrolling the disc title.
Notes:
• If the disc title is shorter than 16 characters, the
track titles begin to scroll immediately.
• If the track title is shorter than 16 characters, the
track titles does not scroll.
Selecting a CD
Each of the DIRECT buttons # corresponds to
a disc loaded into the magazine.
● Selecting a disc from 1 to 6
Press the corresponding DIRECT buttons (1 to
6) #
to select the desired disc.
● Selecting a disc from 7 to 12 (only when a
12 disc CD changer is used.)
Press the corresponding DIRECT buttons (7 to
12)
# for 1 second or more, then select the
desired disc.
Selecting a track
● Track-up
1. Press the right side of the SEARCH button
2 to move ahead to the beginning of the next
track.
2. Each time you press the right side of the
SEARCH button 2, the track advances ahead
to the beginning of the next track.
● Track-down
1. Press the left side of the SEARCH button 2
to move back to the beginning of the current
track.
2. Press the left side of the SEARCH button 2
twice to move to the beginning of the previ-
ous track.