Filter
Top Products
32 VRX6671z
DSP operations
DSP control function
If the DSP (DPH7500z), sold separately, is con-
nected to this unit using the CeNET cable, all
the functions of the DSP can be controlled.
∗ When the DSP is connected, an external ampli-
fier is required.
∗ DSP control can all be operated only when the
panel is open.
DSP functions
There are 2 modes available in DPH7500z, easy
mode and professional mode. Choose one of them
and adjust the sound field and the sound quality.
● Functions common to each mode:
Such as auto loudness, subwoofer etc.
● Easy mode:
Adjustment using the graphic equalizer function
and the DSP function.
● Professional mode:
Adjustment using the space equalizer function
and the parametric equalizer function.
∗ When the easy mode is selected, adjustment for
the professional mode cannot be made. On the
contrary, when the professional mode is selected,
adjustment for the easy mode cannot be made.
∗ For details on functions of each mode, refer to the
owner’s manual supplied with the DPH7500z.
∗ Hereafter the graphic equalizer is referred to as a
G.EQ, the space equalizer referred to as S.EQ
and the parametric equalizer referred to as P.EQ.
Operations common to each mode
Output adjustment of auto loudness,
subwoofer and playback band
1. Press the ADJ button * to switch to the ad-
justment selection display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select “SOUND” and press the ENT
at the center of the JOYSTICK ¡ to change
into the Sound adjustment display. In the
Sound adjustment display “A.LD LEVEL”,
“W.OUT”, “W.LPF”, “HPF”, “T.TONE” are
listed.
Operate the JOYSTICK ¡ rightward or left-
ward to select an item to be adjusted.
3. To make an adjustment on:
● Auto loudness adjustment
Operate the JOYSTICK ¡ upward or down-
ward to adjust an auto loudness level (0 to
10).
● Woofer out adjustment
Select woofer output out of “STEREO”,
“MONO”, or “OFF”.
Operate the JOYSTICK ¡ upward or down-
ward to select a desired item, and then press
the ENT at the center of the JOYSTICK ¡ to
set it.
● Woofer LPF adjustment
Select woofer LPF slope out of “50Hz”,
“80Hz”, “120Hz”.
Operate the JOYSTICK ¡ upward or down-
ward to select a desired item, and then press
the ENT at the center of the JOYSTICK ¡ to
set it.
● HPF adjustment
Select HPF slope out of “50Hz”, “80Hz”,
“120Hz”, or “OFF”.
Operate the JOYSTICK ¡ upward or down-
ward to select a desired item, and then press
the ENT at the center of the JOYSTICK ¡ to
set it.
● Test Tone Output
Select Test Tone Output
Operate the JOYSTICK ¡ upward or down-
ward to select a desired item, and then press
the ENT at the center of the JOYSTICK ¡ to
produce a test tone.