Filter
Top Products
VRX6671z 33
4. After adjustment (setting), operate the JOY-
STICK ¡ rightward or leftward to move the
cursor to “MENU” and press the ENT at the
center of the JOYSTICK ¡ to return to the
adjustment selection display.
5. Press the ADJ button * again to return to
the STANDARD display.
Selecting the easy mode or the
professional mode
∗ The factory default setting is “EASY”.
1.
Press the ADJ button
*
to switch to the ad-
justment selection display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select “DSP/EQ”. “EASY” and “PRO”
items are displayed in the menu bar.
3. Operate the JOYSTICK ¡ rightward or left-
ward to select a desired mode and press the
ENT at the center of the JOYSTICK ¡ to set
the mode thus selected.
4. After setting, press the ADJ button * again
to return to the STANDARD display.
Woofer level adjustment
You can adjust an output sound level of
subwoofer.
1. Press the A-M button & to show the AUDIO-
MODE display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select “W-VOL” and press the ENT
at the center of the JOYSTICK ¡ to show
the woofer level adjusting display.
3. Operate the JOYSTICK ¡ upward or down-
ward to adjust the level (0 to 14).
4. After adjustment, operate the JOYSTICK ¡
rightward or leftward to select “MENU” and
press the ENT at the center of the JOYSTICK ¡
return to the AUDIO-MODE display.
Easy mode/Setting the listening
position
Selection of listening position
1. Press the A-M button & to show the AUDIO-
MODE display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select “POSITION”. “SELECT" and
“DETAIL” are displayed in the menu bar.
3. Operate the JOYSTICK ¡ rightward or left-
ward to select “SELECT”, and press the ENT
at the center of the JOYSTICK ¡ to show
Position selecting display.
4. Operate the JOYSTICK ¡ upward or down-
ward and press the ENT at the center of the
JOYSTICK ¡ to select a desired position.
5. Operate the JOYSTICK ¡ rightward or left-
ward to move the cursor to “MENU”, and press
the ENT at the center of the JOYSTICK ¡ to
return to the AUDIO-MODE display.
Detail adjustment of listening
position
1. Press the A-M button & to show the AUDIO-
MODE display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select “POSITION”. “SELECT" and
“DETAIL” are displayed in the menu bar.
3. Operate the JOYSTICK ¡ rightward or left-
ward to select “DETAIL”, and press the ENT
at the center of the JOYSTICK ¡ to show
Position Detail adjusting display.
4. Operate the JOYSTICK ¡ rightward or left-
ward to select “BALANCE” or “FADER”.
5. Operate the JOYSTICK ¡ upward or down-
ward to make an adjustment.
6. Operate the JOYSTICK ¡ rightward or left-
ward to move the cursor to “MENU”, and press
the ENT at the center of the JOYSTICK ¡ to
return to the AUDIO-MODE display.
DSP operations