Filter
Top Products
13
Press MENU/AUD for more than 3 seconds to access the
Audio/Video setup menu and adjust the following settings:
Press MENU/AUD until Beep appears. Rotate encoder to
turn the confirmation beep on or off.
Press MENU/AUD until Rear View appears. Rotate encoder
to select the V3 input to be mirrored (On) or normal (Off).
Press MENU/AUD until Bright appears. Rotate encoder to
adjust (01 minimum / 30 maximum
).
Press MENU/AUD until Contrast appears. Rotate encoder to
adjust (01 minimum / 30 maximum).
Press MENU/AUD until Color appears. Rotate encoder to
adjust (01 minimum / 30 maximum).
Press MENU/AUD until Tint appears. Rotate encoder to
adjust (01 minimum / 30 maximum).
Color and Tint adjustments only affect AV1 and AV2
auxiliary inputs.
Press MENU/AUD until SCR Saver appears. Rotate encoder
to turn the screen saver on or off.
Press MENU/AUD until Bass C-Freq. appears. Rotate
encoder to select between 60Hz, 80Hz, 100Hz or 200Hz.
Press MENU/AUD until Bass Q-Factor appears. Rotate
encoder to select between 1, 1.25, 1.5 or 2.
Press MENU/AUD until Treble C-Freq. appears. Rotate
encoder to select
between 10kHz, 12.5kHz, 15kHz or 17.5kHz.
Press MENU/AUD until Freq. OSD appears. Rotate encoder to
select turn the frequency OSD on or off.
Audio/Video Menu
Beep Confirmation
Rear View Image
TFT Brightness
TFT Contrast
TFT Color
TFT Tint
Note
TFT Screen Saver
Bass Control
Center Frequency
Bass Control
Q-Factor
Treble Control
Center Frequency
Tuner Frequency OSD
XDVD8130 OPERATION
General Operation - Setup Menu