Filter
Top Products
6
Wiring Diagram - Power/Speakers
XDVD8130 INSTALLATION
Connecting the parking brake lead
(Yellow/Blue - )
The Yellow/Blue lead MUST be
connected for the in-dash monitor
to operate properly. The DVD
video display of the in-dash unit
will not operate while the vehicle
is moving. This is a safety feature
to prevent driver distraction.
In-dash DVD video functions will
only operate when vehicle is
in Park and the parking brake
is engaged. It is illegal in most
states for the driver to view video
while the vehicle is in motion.
This wire must be connected in
accordance with all local, state
and federal laws in your area.
Connecting the reverse lamp lead
(White/Brown + )
The White/Brown lead connects
to the vehicle reverse lamp
circuit (optional). When reverse
gear is selected, the unit will
automatically switch to V3 mode
and display the image on screen.
This will allow the driver to view
images from a back-up camera
(optional) connected to the
dedicated V3 camera input.
Speaker Connections
Do not connect any speaker leads
to chassis ground or each other
as severe damage will occur. Use
4 ohm speakers with a 60 watt
(minimum) power rating only.
Fuses
When replacing a fuse, make sure
new fuse is the correct type and
amperage. Using an incorrect fuse
could damage the unit. To prevent
accidental shorts, insulate any
unused wires.
Wiring Notes: