Filter
Top Products
14
AUDIO OUT (Speaker setup)
There are two available items: They are AUDIO OUT and
DOWN MIX.
AUDIO OUT
You can choose to send the player’s audio signals to
an external receiver using the following outputs:
ANALOG:
Audio signals are sent using inner amplifier. Selecting
this choice will disable the digital audio outputs.
SPDIF/RAW:
Set to this selection will output the raw bit stream
signal of Dolby Digital or DTS from the optical jack. In
order to enjoy Dolby
®
Digital DTS discs, this unit’s
digital output jack must be connected to the
digital-input jack of a Dolby
®
Digital or DTS compatible
receiver or processor.
SPDIF/PCM:
PCM stands for Pulse Code Modulation and is digital
audio. Connecting this unit to an amplifier with a
built-in D/A converter can play the same digital audio
format as on CDs.
NOTES:
Do not play the Dolby Digital or DTS sound tracks on an audio
component without having a built-in Dolby Digital or DTS decoder.
Otherwise, when you play the Dolby Digital or DTS sound track, a
loud noise will come out from the speakers, affecting your ears or
causing the speakers to be damaged.
This player has a conversion function for converting Dolby
®
Digital
into the LPCM format. This allows playback of CDs with the regular
playback system without the need for a special converter.
DOWN MIX
LT/RT
A kind of Dolby Pro-Logic coding formats.
STEREO
Down mixed Stereo L/R audio output.
5.1 CH
Set to “5.1CH” setting items to enable the 5.1
channels.
- - AUDIO SETUP PAGE - -
AUDIO OUT ANALOG
DOWNMIX SPDIF/RAW
FRONT SPDIF/PCM
CENTER
REAR
SUBWOOFER
CNTR DIST.
REAR DIST.
TEST TONE
SELECT AUDIO OUTPUT
- - AUDIO SETUP PAGE - -
AUDIO OUT
DOWNMIX LT/RT
FRONT STEREO
CENTER 5.1CH
REAR
SUBWOOFER
CNTR DIST.
REAR DIST.
TEST TONE
SET DOWNMIX MODE