Filter
Top Products
34
ADDITIONAL INFORMATION
GLOSSARY
DTS
®
DTS
®
stands for Digital Theater System. DTS
®
Digital
Surround is an encoded/decoded system, which
delivers 5.1 channels of “master quality” 48KHz/20-bit
audio sound.
AC-3 (Dolby
®
Digital)
A sound system developed by Dolby Laboratories, Inc.
that gives movie theatre ambience to audio output when
player is connected to a Dolby Digital 5.1 channel
processor or amplifier.
Pro Logic II
Pro Logic II is a matrix decoder. It creates a 5.1- channel
experience from a stereo input system. Pro Logic II
provides a stable open soundfield – good for music;
full-bandwidth stereo surround, 20-20kHz; minimum
alteration of the sound.
MPEG
The word “MPEG” is short for Moving Picture Experts
Group. This is an international standard for
compression of audio. MPEG1 used on VCDs conforms
to up to 2-channel stereo. MPEG 2 used on DVDs
conforms to up to 7.1-channel surround. By connecting
to an MPEG decoder or an AV amplifier with a built-in
MPEG decoder, the MPEG audio of DVD discs
recorded in this format can be played.
Dynamic Range
“Dynamic range” is the difference between the
maximum level and the minimum level of sounds.
Sounds on a movie originally designed for movie
theaters feature a very wide dynamic range, so
sometimes it is not suitable for home use. Depending on
the condition of your listening environment, Dynamic
Range function can reduce the instant sound effect
alteration of the movie while playing back. When
viewing movies at night, turn this function on to avoid
sudden loud sounds from disturbing your neighbors.
Subtitles
Subtitles are captions of language superimposed on
movies, etc. Up to 32 different subtitle languages can be
recorded on one DVD disc. The subtitle function can be
used to select the language of your choice.
Closed Captions
Closed Captions (CC) is a standardized method of
encoding text into an NTSC television signal. A TV can
display the text with a built-in decoder or by a separate
decoder. All TVs larger than 13 inches sold in the US
since 1993 have Closed Caption decoders. Closed
Captions can be carried on DVD, videotape, broadcast
TV, cable TV, and so on.
REGION MANAGEMENT INFORMATION
This DVD player is designed and manufactured to
respond to the Region Management Information recorded
on a DVD disc. If the region number described on the DVD
disc does not correspond to the region number of this DVD
player (The region number can be found on the rear panel
of the DVD player), this DVD player will not play the disc.
The OSD message “WRONG REGION” will show on the
TV screen. This player will play DVD discs made for “ALL”
regions. The illustration below shows the regions and
corresponding region numbers.
X REGION 1 USA & Canada
Y REGION 2 Europe, Japan, South Africa, Middle East
Z REGION 3 Southeast Asia
[ REGION 4 Central & South America, Australia, New Zealand
\ REGION 5 Former Soviet Union, India, Pakistan, Africa
] REGION 6 China
How to change the regional coding!
On the remote control press OPEN/CLOSE when the tray is
open key in 62818 + region (see above) 0 = Multi region. In
rare cases the DVD is blocked so it is unable to be played in
multi region DVD-Players. In these cases the regional coding
must be set to the region indicated on the software.
LICENSE
“Dolby” License
Manufactured under license from Dolby Laboratories.
“Dolby”, Pro Logic and the double-D symbol are
trademarks of Dolby Laboratories.
DTS License
"DTS" and "DTS Digital Out" are trademarks of Digital
Theater Systems, Inc.
Warning
The specifications and design of this product are
subject to change without notice, due to
improvement.