Filter
Top Products
30
-- FM MODE --
STATION: 1
FREQ: 101.70 MHz
MODE: MANUAL
INPUT STATION
It also appears on the VFD:
INPUT
When the digit 1 pressed, OSD appears:
--- TUNER MENU ---
-- FM MODE --
STATION: 1
FREQ: 101.70 MHz
MODE: MANUAL
SAVE TO 1
Also the VFD appears:
SAVE TO 1
After a while, OSD appears:
-- FM MODE --
STATION: 1
FREQ: 101.70 MHz
MODE: MANUAL
And VFD appears:
FM 1 101.7 M
Press
again the FREQ goes up higher frequency.
The program of the frequency spotted goes to
broadcast. With the same way above go on to do the
next frequency searching. To get an optimum of
receiving broadcast you can press or for a fine
frequency adjustment of the program broadcasting,
and the result of which can be kept by pressing
ENTER/PLAY on the remote control.
After saving you can run any digit of 1~20, in each of which
one FREQ frequency broadcasting has been saved, to
listen to the broadcast of the FM frequencies
corresponding with what you have ever saved.
Press (NEXT) or (PREVIOUS) turns in next
higher or previous lower FREQ station.
NOTES:
You can save up to 20 frequencies.
Machine will save the frequencies for later use.
VFD of the machine will display the saved message being
played when the TUNER is on.
The FM frequency range: 87.5 – 108MHz
Frequency-step = 50KHz
For a good reception the FM antenna is required and that
have to be put in an optimum location.
RDS PS FUNCTION (Radio Data
System Program Service station name)
The name of the RDS station now being received
instead of the frequency will display on the VFD.
e.g.: BBC R3
NOTE:
This function can be used under Tuner mode only.