Filter
Top Products
ķ
15
Station Tuning
Switch the unit on with the ¢ ON/OFF button.
The display indicates the frequency tuned to – on FM
in MHz, and on
AM
in kHz.
Frequency Tuning in the FM Band
Select the FM band.
You hear the station last tuned to in the FM band
.
Manual tuning
Tune to the desired station by briefly
pressing one of the buttons
0 TUNING Ń or TUNING Ľ .
Each button pressure will change the frequency by 50 kHz.
If the
0 TUNING Ń or TUNING Ľ button is kept pressed, the fre-
quency range will be sanned in 50 kHz steps at high speed until the
respective button is released.
Automatic tuning (AUTO TUNING)
This frequency search
is started by pressing the ¢ AUTO TUNING
button.
Short presssure
: Search is started in direction of higher frequencies.
Long pressure
: Search is started in direction of lower frequencies.
The search function operates with 50 kHz steps.
The automatic search will stop as soon as it has found a station wor-
thy of reception (of a signal strength sufficient for good reception). It
then can be restarted with the
¢ AUTO TUNING button (brief or long
pressure).
Frequency Tuning in the AM Bands
Select the AM range.
You will hear the station last tuned to in the respective AM band
.
Selecting an AM band
Press the
¢ AM button repeatedly until the desired AM band is se-
lected. This is indicated in the display. Each pressure on the button
steps through the AM band in the order
LW
ɮ MW ɮ SW ɮ LW ɮ MW ɮ etc.
8.9.8.6.0
I 8:0 0
TIME I
kHz
MHz
BATT. CHECK
TUNING
0 . . . 1 . . . 2 . . . 3 . . . 4 . . . 5
FM
LW
MW
SW
: