Filter
Top Products
Your Unit at a Glance
ķ
8
MEMO Ľ For calling up the memory positions (as with ME-
MO
Ń).
Press once: Next lower memory position
.
Press and keep pressed longer than 1 s: Automatic
memory position selection in descending order.
The automatic memory position select function stops
for approx. 5 seconds on each memory position so
that the station received on it can be checked. A fur-
ther pressure on the MEMO
Ľ button will terminate
this function.
TUNING
Ń/Ľ For manual step-by-step tuning in direction of
higher or lower frequencies.
Keep button pressed: Frequency scan up or down.
STEP For selecting the manual tuning steps (the respective
waveband must have been selected).
LW 1 kHz or 9 kHz
SW 1 kHz or 5 kHz
MW 1 kHz or 9 kHz resp. 10 kHz
For selecting the tuning step 9 kHz or 10 kHz in the
MW band, the unit must be switched off
with the
¢ ON/OFF button.
AUTO TUNING Automatic station tuning
Press briefly
: Automatic station tuning in direction of
higher
frequencies.
Keep pressed longer then
0.5 s: Automatic station
tuning in direction of lower
frequencies.
Top of Unit
Telescopic aerial
for FM and SW reception.
SNOOZE Snooze button
Press once to switch off the radio or the alarm func-
tion after wake-up. After five minutes, the wake-up
function will be repeated (sound signal or radio).
Keep pressed the button longer than 2 seconds to
switch off the wake-up function. The function will be
retained for the following day(s).
If the SNOOZE button is not pressed, the sound signal
will sound for 5 minutes or the radio play for 60 minu-
tes. After that, the respective function will be switched
off.
LIGHT Display illumination
Press this button to illuminate the display. After 10
seconds, the illumination will automatically be swit-
ched off.
The duration of the display illumination will be increa-
sed if any other button will be pressed within this
10-seconds period.
A pressure on the
¢ LIGHT button will immediately
switch off the display illumination.