Filter
Top Products
Entering a Meter Band
ķ
18
Entering a meter band on SW
Entered numbers below 100
with subsequent confirmation by the
¢ FREQU./METER button are interpreted as wavelength in meter for
SW.
If the entry is valid, a frequency next to the band centre will be tuned
to in the case of radio bands
, and the beginning of the respective SW
band in the case of amateur bands
.
See table on page 19.
It is possible to enter the following meter bands:
10, 11, 12, 13, 15, 16, 17, 19, 20, 22, 25, 30, 31, 40, 41, 49, 60, 75,
80, 90.
Entry example for the 49-m band:
Numeric buttons 4 9
, button ¢ FREQU./METER ɮ 6075 kHz
(= Deutsche Welle).
8.6.0.7.5
I 8:0 0
4 9
TIME I
kHz
MHz
FREE
m kHz
BATT. CHECK
TUNING
0 . . . 1 . . . 2 . . . 3 . . . 4 . . . 5
FM
LW
MW
SW
Indication of the current band on SW
In the case of direct frequency entry or SW frequency scanning
(within a m-band):
The selected band is permanently indicated.
In the case of direct frequency entry or manual tuning:
If the frequency tuned to lies within one of the above indicated bands,
this band will permanently be indicated in the display.
If the entry made is invalid, the indication " EFF8F appears for
approx. 5 seconds in the display.