Filter
Top Products
Your Unit at a Glance
ķ
6
Front of Unit
Multifunction display
(Description see further up)
ON/OFF On/off button
For switching the unit on and off.
You can switch the unit off even if all buttons are
locked (in LOCK position).
SLEEP Sleep button
For entering a time after which the unit is switched
off (sleep time).
Initial value: 60 minutes. This value is decreased in
steps of 10 minutes by repeatedly pressing this but-
ton.
The following order is run through:
60
ɮ 50 ɮ 40 ɮ 30 ɮ 20 ɮ 10 ɮ Radio off ɮ
Radio on for 60 min. ɮ 50 ... .
Short pressure on the
¢ SLEEP button: Indication
of the remaining sleep time for approx. 5 seconds in
the display (left numeric block).
AUTO AUTOMATIC button
For switching between the three function modes:
– Wake-up with radio. The display indicates
ɷ.
– Wake-up with sound signal (also with switched-on
radio). The display indicates
ʍ.
– Wake-up function off. When switching to this
function, the display (left numeric block) indicates
for approx. 5 seconds "-:--".
ON TIME Switch-on time
For calling up the wake-up time (in the left numeric
block) when the radio is switched on.
For setting the wake-up time (switch-on time)
(e.g., 7 . 3 0 ON-TIME = 7:30).
TIME 1/2 Time I/II
For selecting between Time I and Time II.
For setting and calling up the times I and II, e.g.,
2 1 . 4 0 TIME I/II or TIME I/II 2 1 . 4 0 TIME I/II.
FREE Free
Indicates free memory positions in increasing order.
Two successive pressures on this button will clear
occupied memory positions (e.g., 4 FREE FREE).
STORE Store in memory
You can store in memory up to 40 stations.
To avoid redundant storing, first check whether the
currently received station has already been stored.
If the station has not yet been stored, enter the num-
ber of the desired memory position and store the sta-
tion in memory by pressing the STORE button (e.g.,
1 3 STORE).
If the selected memory position is not free, the indi-
cation will flash for approx. 5 seconds. The memory
position will not be overwritten.