Filter
Top Products
31
Understanding Common Operations
Use the Master Volume control, or the remote control-
ler’s VOL [ ]/[ ] button.
The volume can be set to “Min”, “1” through “79”,
“Max”.
Depending on subwoofer level or listening mode, the
maximum volume varies.
You can select DVD, FM, AM, or connected other AV
component (set top box, Onkyo RI Dock) as the input
source.
Use the DVD receiver’s Input selector to select the input
source.
To select the input source with the remote controller,
press the Input [ ] or [ ] button repeatedly.
When reproducing the audio and video signals from
HDMI IN, select “VIDEO 1”.
You can connect a pair of stereo headphones (1/4-inch
phone plug) to the DVD receiver’s Phones jack for pri-
vate listening, as shown.
Notes:
• Always turn down the volume before connecting your
headphones.
• The speakers are turned off while the headphones plug
is inserted in the Phones jack.
• When you connect a pair of headphones, the listening
mode is set to “Stereo”, unless it’s already set to “Ste-
reo” or “Direct”.
• Only the Stereo and Direct listening modes can be
used with headphones (the listening modes available
also depend on the currently selected input source).
Phones
Input selector Master Volume control
Input
Muting
VOL
Sleep
/
Adjusting the Volume
Selecting the Input Source
DVD receiver
or
Remote
controller
DVD receiver
Remote
controller
or
DVD VIDEO 1 VIDEO 2/DOCK
FMAM
Using Headphones