Filter
Top Products
32
Understanding Common Operations—Continued
You can temporarily mute the output of the DVD
receiver.
With the sleep timer, you can set the DVD receiver to
turn off automatically after a specified period.
If you need to cancel the sleep timer, press the [Sleep]
button repeatedly until the SLEEP indicator disappears.
To check the time remaining until the DVD receiver
sleeps, press the [Sleep] button. Note that if you press the
[Sleep] button while the sleep time is being displayed,
you’ll shorten the sleep time by 10 minutes.
You can adjust the level of Subwoofer during play-
back.
Muting the DVD receiver
Remote controller
Press the [Muting] button.
The output is muted and the MUTING
indicator flashes on the display, as
shown.
To unmute the DVD receiver, press the
[Muting] button again, or adjust the
volume.
The Mute function is cancelled when
the DVD receiver is set to Standby.
Using the Sleep Timer
Remote controller
Press the [Sleep] button repeat-
edly to select the required sleep
time.
The sleep time can be set from 90 to 10
minutes in 10 minute steps.
The SLEEP indicator appears on the
display when the sleep timer has been
set. The specified sleep time appears on
the display for about five seconds, then
the previous display reappears.
MUTING
Adjusting Subwoofer Level
Remote controller
Press the [Subwoofer Level] but-
ton, and then use the Left and
Right [ ]/[ ] buttons to adjust
the volume.
You can adjust the volume of Sub-
woofer from –15 dB to +12 dB in 1 dB
steps.
When you’ve finished, press the [Sub-
woofer Level] button again.