Filter
Top Products
74
Specifications
Amplifier Section
Video Section
Tuner Section
General
■ Video Inputs
■ Video Outputs
■ Audio Inputs
■ Audio Outputs
■ Control Terminal
Specifications and features are subject to change without
notice.
Rated output Power (FTC)
50 watts minimum continuous power per
channel, 6 ohm loads, 2 channels driven at
40 Hz - 20 kHz with a maximum total
harmonic distortion of 0.9 %
THD (Total Harmonic Distortion)
0.9% (Power Rated)
0.08% (1 kHz, 1 W)
Input Sensitivity and Impedance
200 mV/47 k: (LINE)
Frequency Response
20 Hz - 100 kHz/+0 dB - 1.5 dB (Direct
mode)
Signal to Noise Ratio 106 dB (LINE, IHF-A)
Speaker Impedance
6
:
- 16
:
Signal System NTSC
Composite Video Output/Impedance
1.0 V (p-p)/75 : negative sync, RCA
Component Video Output/Impedance
Y: 1.0 V (p-p)/75 :
PB/PR: 0.7 V (p-p)/75 : RCA
Component Video Frequency Response
5 Hz - 50 MHz - 3 dB
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz
AM Tuning Frequency Range
530 kHz - 1710 kHz
Preset Channel 40
Power Supply AC 120 V, 60 Hz
Power Consumption 118 W
Stand-by Power Consumption
0.4 W
Dimensions (W
u H u D)
435 u 90 u 415 mm
17-1/8" u 3-9/16" u 16-5/16"
Weight 8.6 kg (19.0 lbs.)
Operation Condition Temperature and Humidity
5°C–35°C (41°F–95°F), 5%–85%
Disc Compatibility SACD, DVD-Audio, DVD-Video, DVD-
R/RW (VIDEO), DVD+R/RW, CD, CD-
R/RW, Video CD, MP3, WMA, JPEG
Disc that have not been property finalized
may only be partially playable or not
playable at all
HDMI IN
Composite VIDEO1, VIDEO2/DOCK
HDMI OUT
Component OUT
Composite VIDEO OUTPUT
Digital Inputs Optical: 1
Coaxial: 1
Analog Inputs VIDEO1, VIDEO2/DOCK
Subwoofer Pre Output 1
Speaker Outputs FL, FR
Phones 1
RS232 1
IR Input/Output 1/1