Jensen MP8610BT Car Stereo System User Manual


 
MP8610BT
16
Operation (continued)
Audio Menu (continued)
Middle Range (MID)
When in the Mid range menu, use the left ( ) or right ( ) joystick button to select the Middle
Range parameter you would like to adjust.
LEVEL: Use the up (+) or down (-) joystick button to adjust the Middle Range level from
“-6” to “+6”.
C.FREQ: Use the up (+) or down (-) joystick button to adjust the Middle Range center fre-
quency (C.FREQ) to “500Hz”, “1KHz”, “1.5KHz”, or “2.5KHz”.
MID-Q: Use the up (+) or down (-) joystick button to adjust the Middle Quality Factor to
“2N”, “1N”, “1W” or “2W”.
NOTE: For quick access to “MID” once inside the Audio menu, press RPT/3.
Treble
When in the Treble menu, use the left ( ) or right ( ) joystick button to select the desired
Treble parameter you would like to adjust.
LEVEL: Use the up (+) or down (-) joystick button to adjust the Treble level from “-6” to
“+6”.
C.FREQ: Use the up (+) or down (-) joystick button to adjust the Treble center frequency
(C.FREQ) to “10KHz”, “12.5KHz”, “15KHz”, or “17.5KHz”.
NOTE: For quick access to “Treble” once inside the Audio menu, press RDM/4.
Loud
When in the Loud menu, use the up (+) or down (-) joystick button to turn the loudness “ON” or
“OFF”. Once Loud is turned “ON”, use the left ( ) or right ( ) joystick button to select the
desired Loudness parameter you would like to adjust:
LEVEL: Use the up (+) or down (-) joystick button to adjust the loudness level to “Low”
(+6dB), “Mid” (+10dB) or “High” (+15dB).
P. FREQ: Use the up (+) or down (-) joystick button to adjust the loudness Peak Frequency
(P. FREQ) to “400Hz”, “800Hz” or “2.4KHz”.
BOOST: Use the up (+) or down (-) joystick button to adjust the Boost mode to “Flat” or
“On” mode.
NOTE: For quick access to “Loud” once inside the Audio menu, press F-/5.
Subwoofer
The Subwoofer control is only applicable if a subwoofer is connected to the unit.
When in the Sub-W menu, use the up (+) or down (-) joystick button to turn the sub-woofer
“ON” or “OFF”. Once the Subwoofer option is turned on, use the left ( ) or right ( ) joystick
button to select the desired Subwoofer parameter you would like to adjust:
LEVEL: Use the up (+) or down (-) joystick button to adjust the Sub-woofer level from “0” to
”12”.
LPF: Use the up (+) or down (-) joystick button to adjust the Low Pass Filter (LPF) to “Flat”,
“80Hz”, “120Hz” or “160Hz”.
NOTE: For quick access to ‘Sub-W’, once inside the Audio menu, press F+/6.
00
01
02
04
05
06
01
02
03
03
04
05
06
00
01
02
04
05
06
01
02
03
03
04
05
06
00
01
02
04
05
06
01
02
03
03
04
05
06
00
01
02
03
04
05
06
07
08
09
10
11
12
00 01 02 03 04 05 06 07
08 09
10
11 12
1
2
3
4
5
6
7
8
9
Audio Control / Regulador Audio / Contrôleur Audio