Filter
Top Products
66
ENGLISH
1
Select the DAB tuner.
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
2
Select the DAB band (DAB1, DAB2
or DAB3).
Each time you press the
button, the DAB band
changes as follows:
3
Press and hold 5 (up) or ∞ (down)
until the preset service (primary
service) list for the current band
(DAB1, DAB2, or DAB3) appears on
the display.
Note:
You can show the other DAB band preset service
(primary service) lists (DAB1, DAB2, or DAB3)
by pressing 5 (up) or ∞ (down).
4
Select the number (1 – 6) for a
service you want.
Tuning in to a preset DAB
service
You can easily tune in to a preset DAB service.
Remember that you must store services first. If
you have not stored them yet, see “Storing DAB
services in memory” on page 65.
Before you start....
Press FM/AM DAB briefly if CD, CD changer, or
external component is the current source.
1
Select the DAB tuner.
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
2
Select the DAB band (DAB1, DAB2,
or DAB3).
Each time you press the
button, the DAB band
changes as follows:
3
Select the number (1 – 6) for the
preset DAB service (primary) you
want.
Note:
If the selected primary service has some secondary
services, pressing the same number button repeatedly
will tune in to the secondary services.
Selecting a preset service using the
preset service list
If you forget what services are stored in what
preset number, you can check the preset service
list, then select your desired service on the list.
Ex.: When you select the preset service
(primary service) number 1 of the
DAB1 band
EN63-70_KD-LH401[E_EX]f.p65 30/1/04, 5:22 PM66