Filter
Top Products
19
ENGLISH
Searching for your favorite programme
You can search for any one of the PTY codes.
In addition, you can store your 6 favorite
programme types in the number buttons.
When shipped from the factory, the following
6 programme types have been stored in the
number buttons (1 to 6).
• See also “Searching for your favorite service”
on page 69.
To store your favorite programme types, see
below and page 20.
To search for your favorite programme type,
see page 20.
To store your favorite programme types
1
Press and hold TP/PTY for more
than 2 seconds while listening to an
FM station.
The last selected PTY code
appears.
2
Select one of the twenty-nine PTY
codes. (See page 22.)
Selected code name
appears on the display.
The PTY indicator either lights up or flashes.
• If the PTY indicator lights up, PTY Standby
Reception is activated.
If a station starts broadcasting the selected
PTY programme, this unit automatically tunes
in to the station.
• If the PTY indicator flashes, PTY Standby
Reception is not yet activated since the station
being received does not provide the signals
used for PTY Standby Reception.
To activate PTY Standby Reception, you need
to tune in to another station providing these
signals. Press ¢ or 4 to search for
such a station.
When a station providing these signals is tuned
in, the PTY indicator stops flashing and
remains lit. Now PTY Standby Reception is
activated.
Note:
After turning on PTY Standby Reception, you can
change the source without canceling PTY Standby
Reception. If a station starts broadcasting the selected
PTY programme, this unit automatically changes the
source and tunes in to the station.
• If you change the source to AM, PTY Standby
Reception will be temporarily canceled.
• You can only deactivate the PTY Standby Reception
when the source is FM.
Ex.: If you have selected “Pop M” previously
CONTINUED ON THE NEXT PAGE
EN16-22_KD-LH401[E_EX]f.p65 11/2/04, 3:04 PM19