Filter
Top Products
73
ENGLISH
Remedies
This is normal (see page 38).
Wait until the operating
temperature resumes—until
(LOW TEMP.) indicator
goes off.
Press the reset button on the
control panel. (Your preset
adjustments will also be erased.)
(See page 2.)
Insert discs into the magazine.
Insert discs correctly.
Insert the magazine.
Connect this unit and the
CD changer correctly and press
the reset button of the CD
changer.
Press the reset button of the CD
changer.
Press the reset button on the
control panel. (Your preset
adjustments will also be erased.)
(See page 2.)
Causes
You are trying to download an
animation of many frames.
Temperature in the car
compartment is very low—
(LOW TEMP.) indicator
appears.
The built-in microcomputer may
function incorrectly due to
noise, etc.
No disc is in the magazine.
Discs are inserted upside down.
No magazine is loaded in the
CD changer.
This unit is not connected to the
CD changer correctly.
The built-in microcomputer may
function incorrectly due to
noise, etc.
Symptoms
• Download does not
seem to finish.
• Animation does not move.
• “Movie” category settings
in the PSM do not take
effect.
• No indication appears on
the display at all.
• “No Disc” flashes on the
display.
• “No Magazine” flashes
on the display.
• “Reset 08” flashes on the
display.
• “Reset 01” – “Reset 07”
flashes on the display.
• The CD changer does
not work at all.
CD Changer
Graphics
Available characters
In addition to the alphabets (A – Z, a – z), you can use the following characters to assign names to
CDs (both in this unit and in the CD changer) and external component (LINE IN). (See page 53.)
• These characters can be also used to show other information such as disc title/performer, RDS,
and DAB on the display.
Accented letters Numbers and symbols
Upper case Lower case
EN71-75_KD-LH401[E_EX]f.p65 4/2/04, 5:57 PM73