Filter
Top Products
18
ENGLISH
7 When the current source is other than FM,
the TP indicator lights up.
If a station starts broadcasting a traffic
announcement, “Traffic News” appears on the
display, and this unit automatically changes the
source and tunes in to the station.
Using PTY Standby Reception
PTY Standby Reception allows the unit to switch
temporarily to your favorite programme (PTY:
Programme Type) from any source except AM
stations.
• See also “Using PTY Standby Reception” on
page 69.
To select your favorite PTY code for PTY
Standby Reception
When shipped from factory, PTY Standby
Reception has been set to search for “News”
programmes.
You can select your favorite programme type for
PTY Standby Reception.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 46 and 47.)
2
Press number button 4 to select
“TUNER”—Tuner category of the
PSM settings.
The “PTY Stnby” (standby) setting screen
appears on the display.
3
Select one of the twenty-nine PTY
codes. (See page 22.)
Selected code name
appears on the display and
is stored into memory.
4
Finish the setting.
To set PTY Standby Reception
If a DAB tuner is connected, the following
operations will set PTY Standby Reception for
both the FM tuner and DAB tuner. (See page 69.)
1 Press M MODE while listening to an FM
broadcast.
“Mode” appears on the display.
The next-step-operation buttons
start flashing.
2 Press number button 3 to activate PTY
Standby Reception while “Mode” is still on the
display.
Each time you press the button, PTY Standby
Reception turns on and off alternately.
The display returns to the source indication
screen.
Ex.: When the currently selected PTY code
for PTY Standby Reception is “News”
PTY indicator appears.
(either lights up or flashes)
After about
5 seconds
EN16-22_KD-LH401[E_EX]f.p65 4/2/04, 5:16 PM18