Filter
Top Products
71
ENGLISH
Symptoms
• Sound cannot be heard
from the speakers.
• This unit does not work
at all.
• “Panel Connect Error”
appears on the display.
• When “Reset P00” to
“Reset P44” appears on
the display.
• SSM (Strong-station
Sequential Memory)
automatic preset does
not work.
• Static noise while
listening to the radio.
• Disc cannot be played back.
• CD-R/CD-RW cannot be
played back.
• Tracks on the CD-R/
CD-RW cannot be
skipped.
• Disc cannot be ejected.
• Disc cannot be
recognized (“No Disc,”
“Loading Error,” or “Eject
Error” flashes on the
display.)
• Disc sound is sometimes
interrupted.
• “No Disc” flashes on the
display.
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Remedies
Adjust it to the optimum level.
Check the cords and connections.
Press the reset button on the
control panel. (Your preset
adjustments will also be
erased.) (See page 2.)
Remove the control panel, wipe
the connectors, then attach it
again. (See page 55.)
Press the reset button on the
control panel. (See page 2.) If
the reset button does not work,
check the installation. (Ex. you
have used a screw which is
longer than specified.)
Store stations manually.
Connect the aerial firmly.
Insert the disc correctly.
• Insert a finalized CD-R/
CD-RW.
• Finalize the CD-R/CD-RW
with the component which
you used for recording.
Unlock the disc. (See page 30.)
While pressing
(standby/on attenuator), press
and hold 0 (eject) for more than
2 seconds to eject the disc.
Before re-inserting a disc, wait
for several seconds.
Stop playback while driving on
rough roads.
Change the disc.
Check the cords and connections.
Insert a disc into the loading slot.
Insert the disc correctly.
Causes
The volume level is set to the
minimum level.
Connections are incorrect.
The built-in microcomputer
functions incorrectly due to
noise, etc.
The control panel is not attach
correctly and firmly.
There is something blocking the
control panel movement.
Signals are too weak.
The aerial is not connected
firmly.
Disc is inserted upside down.
CD-R/CD-RW is not finalized.
Disc is locked.
The CD player may function
incorrectly.
You are driving on rough roads.
Disc is scratched.
Connections are incorrect.
No disc in the loading slot.
Disc is inserted incorrectly.
Disc Playback
General
Tuner
EN71-75_KD-LH401[E_EX]f.p65 16/2/04, 7:29 PM71