Filter
Top Products
12
ENGLISH
FM1 FM2 FM3 AM
SRC
M
MODE
Searching for a station manually:
Manual search
1
Select the band (FM1 – 3, AM).
1 Press SRC (source)
repeatedly to select the tuner.
2 Press and hold SRC.
Each time you press and hold
the button, the band changes.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Press and hold ¢ or 4
until “Manual Search” starts flashing
on the display.
3
Tune in to a station you want while
“Manual Search” is flashing.
• If you release your finger from the button,
the manual mode automatically turns off
after 5 seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for
FM and 9 kHz for AM) until you release
the button.
When an FM stereo broadcast
is hard to receive:
1 Press MODE (M) to enter the
functions mode while listening to
an FM stereo broadcast.
“Mode” appears on the display.
2 Press number button 1 to select “Mono On”
while “Mode” is still on the display.
Each time you press the button, “Mono On”
and “Mono Off” appears alternately.
When “Mono On” is selected, the MONO indicator
appears, and the sound you hear becomes monaural
but the reception will be improved.
After about
5 seconds
The display returns to the source indication
screen.
345621
See page 30 for this function.
To tune in to stations of
higher frequencies
To tune in to stations of
lower frequencies
EN11-15DV5000[U]f.p65 03.5.15, 14:2812