Filter
Top Products
60
ENGLISH
• When the current disc is a CD:
Playback starts from the first track of the
current disc.
Note:
If you change the source, CD changer play also stops.
Next time you select the CD changer as the source,
CD changer play starts from where playback has been
stopped previously.
To change the display information
While playing back a disc, you can change the
disc information shown on the display.
Press DISP (D) repeatedly.
Each time you press the button,
the display changes.
• For details, see pages 41 and
42.
Selected disc number
Press ¢ briefly during
play, to skip ahead to the
beginning of the next track.
Each time you press the button
consecutively, the beginning of
the next track is located and
played back.
To fast-forward or reverse the track
Note:
During this operation on an MP3 disc, you can only
hear intermittent sounds. (The elapsed playing time
also changes intermittently on the display.)
To go to the next or previous tracks
Press and hold ¢ , during
play, to fast-forward the track.
Press and hold 4, during
play, to reverse the track.
Press 4 briefly during play, to skip back to
the beginning of the current track.
Each time you press the button consecutively,
the beginning of the previous track is located and
played back.
Current track and elapsed playing time
345621
To go to a particular disc directly
Press the number button corresponding to the
disc number to start its playback (while the CD
changer is playing).
• To select a disc number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a disc number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than
one second.
Note:
You can also use the DISC +/– buttons on the remote
controller to select a disc.
D
DISP
EN59-64DV5000[U]f.p65 03.5.15, 14:4160