Filter
Top Products
15
ENGLISH
Changing the display pattern
By pressing DISP (D), you can change the
information shown on the display.
Each time you press the button,
the display patterns change as
follows:
If a name has been assigned
to a station, it will be shown
instead of “NO NAME.”
Selecting a preset station using the
preset station list
If you forget which stations are stored in which
preset numbers, you can check the preset
station list, then select your desired station.
1
Select the band (FM1 – 3, AM).
1 Press SRC (source)
repeatedly to select the tuner.
2 Press and hold SRC.
Each time you press and hold
the button, the band changes.
2
Press and hold 5 (up) or ∞ (down)
until the preset station list for the
current band (FM1, FM2, FM3, or AM)
appears on the display.
Notes:
• You can show the other FM band preset
station lists (FM1, FM2, or FM3) by pressing
5 (up) or ∞ (down).
• If a name has been assigned to a station (see
page 57), it will be shown instead of the
station frequency.
3
Select the number (1 – 6) for the
preset station you want.
FM1 FM2 FM3 AM
D
DISP
345621
SRC
Appears only when
selecting a preset station
number.
Clock time
EN11-15DV5000[U]f.p65 03.5.15, 14:2815