Filter
Top Products
ENGLISH
18
The following marks used in this manual indicate
the playable discs.
BASIC DISC PLAYBACK
Starting playback
1
Open the control panel.
2
Insert a disc into the loading slot.
The disc loading lamp start
flashing, and the unit draws in
the disc automatically.
DO NOT insert a disc while the disc loading
lamp is flashing* or is not lit**.
* Flashing: while loading or ejecting a disc
**Not lit: when a disc has been loaded.
3
Close the control panel by hand.
The disc type is automatically
detected, and playback starts
automatically. (If a disc is CD,
VCD without the PBC
function, or MP3, playback
will be repeated until you
stop it.)
• If a menu appears while playing a DVD or
VCD with PBC function, see “Menu
operations” on page 24.
Disc loading lamp
Video CD
with/without PBC
Audio CD
DVD Video
MP3 disc
Video CD
with PBC
Before performing any operations, make sure
the following....
• To watch the playback pictures, select the an
appropriate video system (NTSC or PAL) to
match it to the connected monitor. (See page
53.)
• Turn on the monitor for playing a DVD or VCD.
If you turn on the monitor, you can also control
the CD and MP3 playback by referring to the
monitor screen.
• For DVD playback, you can change the
Setup Menu setting to your preference.
(See pages 43 – 46.)
• When you want to operate the DVD/CD player
using the buttons on the control panel, see
“OTHER DISC OPERATIONS” on pages 35 to
42.
If “ ”appears on the monitor when
pressing a button, the disc cannot accept an
operation you have tried to do.
• In some cases, without showing “ ,”
operations will not be accepted.
3456 EQ21
D
SRC
DISP
ATT
SEL
MODE
M
All discs
listed here
EN16_21DV5000[U]f.p65 03.5.15, 14:3218