Filter
Top Products
ENGLISH 55
CONNECTION/INSTALLATION
Connection
❏ Connecting wires to terminals for Toyota Cars
10 A fuse
Connect to the vehicle’s reverse lamp harness when
using the optional rear view camera.
Connect to the vehicle’s parking
brake detection switch harness.
• For best safety, be sure to
connect the parking sensor.
Purple with white stripe
(Reverse sensor wire)
Connect the antenna
cord to the antenna
terminal.
Page57
Page57
2
5
Page57
USB terminal:
Pages56 – 57
Pages56 – 57
When using the optional power amplifier, connect to
its power control terminal.
Not used.
1
Blue with white stripe
(Power control wire)
Brown (Mute control wire)
*
Pin Color and functions of Connector A, B, and C
A1 Orange/White Dimmer
A2 Yellow Battery
A4 Red Ignition (ACC)
A5 Blue Antenna control
A6 Black Ground connection
A8/A7
White ª / White/Black ·
Left speaker (front)
A10/A9
Gray ª / Gray/Black ·
Right speaker (front)
B2/B1
Green ª / Green/Black ·
Left speaker (rear)
B6/B5
Purple ª / Purple/Black ·
Right speaker (rear)
C6 Gray/Red Ground
C7 Light green/Red Input 1
C8 Purple/Red Input 2
Connect to vehicle’s harness.
Connect to vehicle’s harness.
Connect to the vehicle’s steering remote harness.
• Depending on the type of vehicle, it cannot be
connected.
* If no connections are made, do not let the cable come out from the tab.