Kenwood KIV-BT900 Car Satellite Radio System User Manual


 
English
|
17
Function of remote control
Direct Music Search
Searching the music by entering the file number.
1
Enter Direct Music Search mode
Press the [DIRECT] button on the remote
control.
2
Enter the music number
Press the number buttons on the remote
control.
3
Search the music
Press the [4] or [¢] button.
Cancelling Direct Music Search
Press the [DIRECT] button.
• Direct Music Search cannot be performed during playing of
Zune/ “Music Editor” media, Random play, or scan play.
USB Setting
You can select following USB Setting items.
1
Select USB source
2
Enter Menu List mode
Press the [MENU] button.
3
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Settings”.
4
Select the setting item
Turn the [Volume] knob and press it when the
desired item is displayed.
Display Overview
“Settings”
“Skip Search”*
1
Sets the ratio of skip performed with <Skip
Search> (page 16).
“0.5%”/ “1%”/ “5%”/ “10%”
“Device F/W
Version”
Display the version of the firmware of this unit.
“Device F/W
Update”
Updates the firmware. The update information
will be posted on the following URL as necessary.
www.kenwood.com/cs/ce/
( : Factory setting)
*
1
Selectable when Music Editor media or Zune is used.
5
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
• The setting of “Skip Search” in <iPod Setting> (page 9)
and that in <USB Setting> (page 17) are always the same.
Changing the setting of one reflects the other.