Filter
Top Products
58
|
KIV-BT900/ KIV-700
Satellite Radio Tuner Control (Optional)
Basic Operation
Selecting Satellite Radio source
Press the [SRC] button. Turn the [Volume] knob
and press it when the desired item is displayed.
Select the “SIRIUS”, or “XM Radio” display.
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly also switches source.
⁄
• You need to register to the service provider to receive
the service by Satellite Radio. Consult the service
provider if “CALL … TO SUBSCRIBE” appears.
• The radio may take a little time to start receiving after
you select the Satellite Radio source.
• If the signal reception fails, “Acquiring Signal”/ “No Signal”
appears.
Selecting the channel
Press the [4] or [¢] button.
Selecting the Preset Band
1. Enter Menu List mode
Press the [MENU] button.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “SR1”, “SR2”, “SR3” or “SR4”. (SIRIUS)
Select “XM1”, “XM2”, “XM3” or “XM4”. (XM)
Switching display
Press the [DISP] button to select display mode.
Selects the Information or Clock.
Display example of information display mode
1
1 Station information (see <Customization of
Display> (page 36))
Satellite Radio Setting
You can select following Satellite Radio Setting
items.
1
Select Satellite Radio source
2
Enter Menu List mode
Press the [MENU] button.
3
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Settings”.
4
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Display Selectable setting/item
“Settings”
“Seek Mode”
Selects the tuning mode of the radio.
“Channel”: Normal manual seeking control.
“Preset”: Search in order of the channels in the
Preset memory
“ESN” Displays the Electronic Serial Number of satellite
radio.
“ESN=”
( : Factory setting)
5
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Category and Channel Search
Selecting the channel and category you want to
receive.
1
Select Satellite Radio source
2
Enter Menu List mode
Press the [MENU] button.
3
Enter Category and Channel Search mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Channel Search”.
4
Select the Category
Turn the [Volume] knob to select Category, and
then press the [Volume] knob.
5
Select the Channel
Turn the [Volume] knob to select Channel, and
then press the [Volume] knob.
SRC
4
MENU
¢
Volume