Filter
Top Products
Accessory of KIV-BT900
Installation the Microphone Unit
1
Check the installation position of the microphone
(accessory 7).
2
Remove oil and other dirt from the installation
surface.
3
Install the microphone.
4
Wire the microphone cable up to the hands-free
box with it secured at several positions using tape
or the like.
Fix a cable with a commercial
item of tape.
Peel the release coated paper of double-face adhesive tape to
fix on the place shown above.
Adjust the direction of the microphone to the driver.
Accessory 7
⁄
• Install the microphone as far as possible from the cell-
phone.
78
|
KIV-BT900/ KIV-700
Installation/Removing the Unit