Kenwood KIV-BT900 Car Satellite Radio System User Manual


 
English
|
81
USB ERROR: Some trouble may have occurred to the
connected USB device.
Remove the USB device, then cycle the
power switch to ON. If the same display is
repeated, use another USB device.
iPod Error: Connection to the iPod has failed.
Remove the USB device and then
reconnect it.
Confirm that the software for the iPod is
the latest version.
USB REMOVE (Blink):
The Remove mode has been selected for the
USB device/iPod. You can remove the USB
device/iPod safely.
Over Capacity: Recording or copying was canceled because
internal memory space ran out while copying
from USB device.
Delete unnecessary files and record or
copy once more.
Copy Error: • An incompatible digital audio player was
used.
• Cannot copy because the USB device is not
firmly inserted.
Delete Error:
Format Error: Abnormal condition detected while deleting
or formatting.
Repeat the operation once more. This may
take some time. If the message recurs,
contact your nearest Kenwood dealer.
Can’t Download:
Download Error:
This unit does not work properly for some
reason.
Press the reset button to download it
again. If this error is still displayed, consult
a local Kenwood dealer.
Try all over again from the start. If this error
is still displayed, consult a local Kenwood
dealer.
Writing Error: Writing failed while the file was downloaded.
Try the downloading again.
Memory Full: The TAG Memory of HD Radio or RDS is full.
iPod Full: The iPod Memory is full.
No TAG Function:
iPod which does not support the TAG
Memory is connected.
N/A Channels: No receivable channel and category.
No Number: • The calling party does not notify a caller ID.
• There is no phone number data.
No Data: • There is no outgoing call list.
• There is no incoming call list.
• There is no missed call list.
• There is no phone book list.
No Entry: The cell-phone has not been registered
(pairing).
HF Disconnect: The unit cannot communicate with the cell-
phone.
HF Error 07: The memory cannot be accessed.
Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
HF Error 68: The unit cannot communicate with the cell-
phone.
Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
Un Known: The Bluetooth device cannot be detected.
Device Full: 5 Bluetooth device have already been
registered. No more Bluetooth device cannot
be registered.
PIN Code NG: The PIN code is wrong.
Connect NG: The unit cannot be connected to the device.
Pairing Failed: Pairing error.
Err No Matching:
The voice tag is wrong. Voice cannot be
recognized because of an unregistered voice
tag, etc.
Too Soft: Voice is too small and cannot be recognized.
Too Loud: Voice is too large to be recognized.
Too Long: The word or utterance is too long to be
recognized.
No Phonebook: Data is not contained in the phone book.
No Message: No short message in In Box.
No Record: The voice tag is not registered in the phone
book.
Memory Full: The number of voice tags reaches the
maximum number to be registered in the
phone book.
Favorite: No Memory:
The procedure is not registered to Favorite
Preset Memory
No Access: The procedure preset with Favorite Control
cannot be available. The preset content may
not be recalled depending on the selected
source or mode.
No Voice: No call.