Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the 910 Digital Audio Preamplifier
10
Figure 2: Connecting the 910 Digital Audio Preamplifier
6.1 Connecting the RS-232 Port
You can connect to the unit via a straight pin-to-pin RS-232 connection,
using for example, a PC.
Connect the RS-232 9-pin D-sub port on the unit via a straight cable (pin 2
to pin 2, Pin 3 to pin 3, and pin 5 to pin 5) to the RS-232 9-pin D-sub port
on the PC. Is a shielded cable is used, connect the shield to pin 5.
Note: There is no need to connect any other pins.
6.2 Connecting the ETHERNET Port
You can use the Ethernet port to control the 910.
• To connect directly to a PC using a crossover cable, see
Section 6.2.1