Filter
Top Products
Connecting the 910 Digital Audio Preamplifier
13
13
Figure 5: Connect Screen
2. Select the method to connect to the Ethernet port of the 910.
Select:
• Ethernet, if you know the IP address number
1
or the machine
name. The default name for the machine is
KRAMER_XXXX
2
• Serial, if you are connected via a serial port
3. Click OK.
The Device Properties window appears, (see
Figure 6).
1 The default IP address is 192.168.1.39
2 The four digits are the last four digits of the machine’s serial number