Filter
Top Products
Operating the 910 Digital Audio Preamplifier
17
17
7.2 Controlling the 910 from the PC
To operate your device remotely from your PC over the RS-232, USB or
Ethernet ports, you need to download and install Kramer's 910 Control
Application
1
.
Figure 8: 910 Control Application Screen
For an explanation of all control commands, see Section 10
7.3 Using the Infrared Remote Controller
.
To operate your device using the RC-IR2 infrared remote controller, see the
User Manual packed with the remote controller.
7.4 Updating the 910 Firmware
The 910 functions by means of a device microcontroller that runs firmware
located in FLASH memory.
You can download
1
and upgrade the latest version of firmware
2
according
to the recommendation of Kramer Technical Support.
1 Available on our Web site at http://www.kramerelectronics.com
2 The firmware is installed using the P3K software available from the Kramer Web site
http://www.kramerelectronics.com