Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
910 Commands in Protocol 3000
20
10 910 Commands in Protocol 3000
This RS-232/RS-485 communication protocol lets you control the machine
from any standard terminal software (for example, Windows
®
HyperTerminal Application) and uses a data rate of 115200 baud, with no
parity, 8 data bits, and 1 stop bit.
This section describes all commands sent to the 910. For an explanation of
the syntax and use of Protocol 3000, see
Section 10
10.1 Help Commands
.
Command Syntax Response
Protocol handshaking
#CR ~OKCRLF
10.2 Device Initiated Messages
Command Syntax
Start message
Kramer Electronics LTD. , Device Model Version
Software Version
Switcher actions:
Audio channel has switched (breakaway mode)
AUD IN>OUT
10.3 26BResult and Error Codes
Syntax
Command ran successfully, no error.
COMMAND PARAMETERS OK
Protocol Errors:
Syntax error ERR001
Command not available for this device ERR002
Parameter is out of range ERR003
Unauthorized access (command run without the
matching login).
ERR004