Filter
Top Products
NDA-30135 Revision 1 Page 13
Attendant Monitor Operations Manual INSTALLATION & CONFIGURATION
Tenant Number
Database
The Tenant Database is an APM database used by the Attendant Monitor
application and other OAI applications. It provides a mechanism for retrieving the
tenant number of an extension.
The Tenant Number database consists of a Master Database file component and an
Application Database file component:
Master Database File - filename ’tenant_m’.
The tenant_m master database structure and example entries are shown in the table
below:
Field Definitions
- The Tenant Number field contains the Tenant Number that is used by one
or more extensions. Tenant Numbers are associated with extensions using
the following methods:
- A Tenant Number may be associated with a set of extensions defined by the
First and Last Extension fields. The First Extension field contains the
smallest extension number in the set, and the Last Extension field contains
the largest extension number in the set.
- A Tenant Number may be associated with a single extension by setting the
First and Last Extension fields to the same extension value.
- A Tenant Number may be associated with a single extension that contains a
non-numeric character such as ’*’ or ’#’. The First Extension field contains
the extension value, and the Last Extension field is left blank.
Application Database File - filename ’tenants’.
The tenants application database structure is shown in the table below:
Field Name
Type Size Min.
Value
Max.
Value
Example
Entry
First Extension ASCII 10
0
Last Extension ASCII 10
99999
Tenant Number Numeric 3 1 255
1
Field Description Data Type
First Extension ASCII
Last Extension ASCII
Tenant Number Short Integer