Filter
Top Products
Page 14 NDA-30135 Revision 1
INSTALLATION & CONFIGURATION Attendant Monitor Operations Manual
Tenant Number
Database (cont)
Configuring the Tenant Number Database
This database must be configured before the Attendant Monitor application can
operate. The database values are set using the APM Applications Manager Main
Menu-- Selecting the Application Configuration option. The general sequence is
the following:
1. Build a Master Database File
Enter data into the master database fields to add the necessary phone line
numbers.
2. Process the Application Database
Use the Process Application Databases option on the APM Database
Administration menu to create the application database file.
(When the Process option is activated, data is drawn from the master database
and converted to the formats specified in the application definition file.)
3. Install the Application Database
Use the Install Application Databases option on the APM Database
Administration menu to enable Attendant Monitor to copy its database.
Note: Refer to the APM Operations Manual for more detailed instructions on adding a
database.
Initialize
Component
The Attendant Monitor component must be initialized from the APM. Follow the
steps below to initialize the AttendantMonitor component:
- On the APM System Operations Menu, select the Non-CRT Application
Control option.
- Use the Initialize command to start up the “AttendantMonitor” component.
This completes the Atendant Monitor application installation and
configuration...