Filter
Top Products
NDA-30135 Revision 1 Page 3
Attendant Monitor Operations Manual INSTALLATION & CONFIGURATION
Chapter 2 INSTALLATION & CONFIGURATION
This chapter provides a step-by-step description of the installation, initial
configuration, and Main Menu functions for Attendant Monitor. Before proceeding
with the configuration, ensure that the SCO UNIX operating system and the
Applications Manager (APM) platform software are installed on the system.
The Applications Manager Operations Manual provides detailed instructions for
using the APM menus and for completing the data entry screens illustrated in this
manual. NEAX2400 IMS system manuals provide the procedures for making the
data assignments at the NEAX MAT.
Installation Procedure
This section describes the procedures to install the Attendant Monitor application
software. Follow the procedure below to install the software.
Note: Some keyboards use a marked Return key for the carriage return function. Other
keyboards mark this function key as Enter. The installation procedure will iden-
tify this function as Return (Enter). When the procedure indicates, use the appro-
priate marked key on your particular keyboard.
To begin the Attendant Monitor
software installation, type apmadm at
the UNIX login prompt and press
Enter.
(If your “apmadm” account requires a
password, enter the “apmadm”
password at the subsequent password
prompt.)
Continue with the installation on the following pages...
login: apmadm
password: