Onkyo TX-SR702E Car Stereo System User Manual


 
11
Front & Rear Panels
—Continued
For detailed information, see the pages in parentheses.
A
COMPONENT VIDEO IN 1, 2, 3 (28, 30, 32)
These component video inputs can be used to con-
nect AV components with component video outputs,
such as DVD players.
B
AM ANTENNA (24)
These push terminals are for connecting an AM
antenna.
C
COMPONENT VIDEO OUT (27)
This component video output can be used to con-
nect a TV or projector with a component video
input.
D
FM ANTENNA (24)
This jack is for connecting an FM antenna.
E
RS232 (38)
The TX-SR602/602E, TX-SR8260, and American
and Australian TX-SR702 do not have this port.
This port is for connecting the AV receiver to home
automation equipment and external controllers.
F
12V TRIGGER OUT ZONE 2 (79)
This output can be connected to the 12-volt trigger
input on a power amplifier in Zone 2. When Zone 2
is turned on, a 12-volt trigger signal is output.
G
IR IN (79)
If you want to use the remote controller to control
the AV receiver from Zone 2, or if the AV receiver is
installed in a cabinet and the line of sight between
the AV receiver and the remote controller is
obstructed, a commercially available IR receiver
can be connected here.
H
MONITOR OUT (27)
The S-Video or composite video jack should be
connected to a video input on your TV or projector.
I
OPTICAL DIGITAL (27, 28, 30, 32, 34, 35)
The number of digital outputs depends on where the
the AV receiver is purchased.
The optical digital audio inputs can be used to con-
nect CD and DVD players, and other components
with an optical digital audio output.
The optical output can be used connect a CD
recorder or other digital recorder with an optical
digital input.
J
COAXIAL DIGITAL (27, 28, 30, 32, 34, 35)
The coaxial digital audio inputs can be used to con-
nect CD and DVD players, and other components
with a coaxial digital audio output.
The coaxial output can be used connect a CD
recorder or other digital recorder with a coaxial dig-
ital input.
The TX-SR602/602E and TX-SR8260 do not have a
coaxial output.
K
ZONE 2 SPEAKERS (76)
These terminal posts are for connecting speakers in
Zone 2.
L
FRONT, CENTER, SURROUND &
SURROUND BACK SPEAKERS (23)
These terminal posts are for connecting your front,
center, surround, and surround back speakers.
VUTSRQP
G
KM
H 9
J
1BCD L
WX
6
Y
TX-SR602/602E, TX-SR8260