Filter
Top Products
81
Controlling Other Components
—Continued
Resetting REMOTE MODE Buttons
If you’ve entered another code for one of these button
and now want to return to the default, perform the fol-
lowing procedure.
By default, some REMOTE MODE buttons are prepro-
grammed with remote control codes for controlling
Onkyo components connected via .
Resetting the Remote Controller
Here you can reset the remote controller to its default
settings.
1
While holding down the REMOTE
MODE button that you want to
reset, press the TV [ ] button.
Release both buttons and wait two sec-
onds.
2
Press the REMOTE MODE button
again.
The REMOTE MODE button is reset.
STANDBY
REMOTE
MODE
TV
RECEIVER
1
While holding down the
[RECEIVER] button, press the
[STANDBY] button.
Release both buttons and wait five sec-
onds.
2
Press the [RECEIVER] button
again.
The remote controller is reset.
RECEIVER
STANDBY
RECEIVER