Onkyo TX-SR702E Car Stereo System User Manual


 
30
Connecting the AV receiver
—Continued
This section shows how to connect a VCR for playback
so that you can watch videos via the AV receiver.
Video Connections
Use an S-Video cable to connect the AV receiver’s
S VIDEO 1 IN jack to a S-Video output on your VCR,
as shown.
OR
Use a composite video cable to connect the AV
receiver’s V VIDEO 1 IN jack to a composite video
output on your VCR, as shown.
An S-Video connection provides better picture quality
than a composite video connection.
Audio Connections
Use an analog audio cable to connect the AV receiver’s
VIDEO 1 IN L/R jacks to an analog audio output on
your VCR, as shown.
Video Connections
If you connect to a component video input, you must
assign it (see page 43).
Use a component video cable to connect the AV
receiver’s COMPONENT VIDEO IN2 or 3 jacks to a
component video output on your D-VHS VCR, as
shown.
Your TV must also be connected via component video.
Audio Connections
If you connect to a digital audio input, you'll need to
assign it (see page 42).
Use an optical digital audio cable to connect one of the
AV receiver’s OPTICAL DIGITAL IN jacks to an
optical output on your D-VHS VCR, as shown.
OR
Use a coaxial digital audio cable to connect one of the
AV receiver’s COAXIAL DIGITAL IN jacks to a
coaxial output on your D-VHS VCR, as shown.
Connecting a VCR for Playback
VIDEO 1
LR
S VIDEO OUT
VIDEO OUT
AUDIO
OUTPUT
IN
IN
L
R
VCR
Connect one
or the other
Connecting a D-VHS VCR for Playback
IN
Y
P
B
PR
COMPONENT
VIDEO OUT
COMPONENT VIDEO
Y
P
B
PR
D-VHS VCR
DIGIT
IN
COAXIAL
DIGITAL OUT
OPTICAL
DIGITAL OUT
COAXIAL
AL
OPTICAL
IN
D-VHS VCR
Connect one or the other