Onkyo TX-SR702E Car Stereo System User Manual


 
12
Front & Rear Panels
—Continued
M
AC OUTLETS (38)
These switched AC outlets can be used to supply
power to other AV components. The type of outlet
depends on the country in which you purchased
your AV receiver. Some models have a single outlet.
N
Grounding screw (TX-SR702/702E only) (36)
This screw is for connecting a turntable’s ground
wire.
O
PHONO IN (TX-SR702/702E only) (36)
This analog input is for connecting a turntable.
P
CD IN (34)
This analog audio input is for connecting a CD
player’s analog audio output.
Q
TAPE IN/OUT (34)
This analog audio input and output are for connect-
ing a recorder with an analog audio input and output
(cassette, Mini Disc, etc).
R
VIDEO 3 IN (27, 31)
Here you can connect a video source (VCR, set-top
box, etc). Input jacks include S-Video, composite
video, and analog audio.
S
VIDEO 2 IN/OUT (30, 31)
Here you can connect a VCR. Input and output
jacks include S-Video, composite video, and analog
audio.
T
VIDEO 1 IN/OUT (30, 31)
Here you can connect a VCR. Input and output
jacks include S-Video, composite video, and analog
audio.
U
DVD IN (28, 29)
Here you can connect a DVD player. Input jacks
include S-Video, composite video, and analog
audio. You can connect a DVD player’s 2-channel
analog audio output or 5.1-channel analog audio
output.
V
ZONE 2 LINE OUT (76)
This analog audio output can be connected to a line
input on an integrated amplifier in Zone 2.
W
REMOTE CONTROL (37)
This (Remote Interactive) jack can be con-
nected to an jack on another Onkyo AV compo-
nent. The AV receiver’s remote controller can then
be used to control that component. To use , you
must make an analog audio connection (RCA)
between the AV receiver and the other AV compo-
nent, even if they are connected digitally.
X
PRE OUT (37)
These analog audio outputs are for connecting a
separate power amplifier. Useful if you want to con-
nect a more powerful amplifier and use the AV
receiver as a preamp. The SUBWOOFER jack is for
connecting a powered subwoofer.
Y
VOLTAGE SELECTOR (3)
Certain models only.
This voltage selector provides compatibility with
power systems around the world.