Filter
Top Products
10
1. Connect the gray wire to the right
front speaker’s positive terminal.
This terminal is usually marked
with a plus (+) sign or red mark.
2. Connect the gray/black wire to the
right front speaker’s negative ter-
minal. This terminal might be
marked with a minus (
–
) sign or it
might not be marked at all.
3. Connect the white wire to the left
front speaker’s positive terminal.
4. Connect the white/black wire to
the left front speaker’s negative
terminal.
5. Connect the violet wire to the right
rear speaker’s positive terminal.
6. Connect the violet/black wire to
the right rear speaker’s negative
terminal.
7. Connect the green wire to the left
rear speaker’s positive terminal.
8. Connect the green/black wire to
the left rear speaker’s negative
terminal.
Connecting One Pair of
Speakers
If you are using only one pair of
speakers, follow Steps 1-4 on the left
to connect the harness with the 14-pin
connector to the speakers.
Connecting the Antenna
Connect the vehicle’s antenna cable
to the stereo’s large black antenna
connector.
(illus - (White) (White/Black)
Front Left Speaker
(Gray) (Gray/Black)
Front Right Speaker
(Green) (Green/Black))
Rear Left Speaker
(Violet) (Violet/Black))
Rear Right Speaker
(illus - (White) (White/Black)
Left Speaker
(Gray) (Gray/Black)
Right Speaker
(Green) (Green/Black))
Do not Connect
(Violet) (Violet/Black))
Do not Connect
(illus)
12-2152.fm Page 10 Wednesday, July 14, 1999 2:48 PM