Filter
Top Products
27
4. If either fuse is blown, replace it.
Use only standard 1
1
/
4
-inch fuses
with the proper rating. The yellow
continuous power wire’s fuse must
be 10 amps, and the red power
wire’s fuse must be 1.0 amp.
Caution: Make sure you replace a
fuse only with another fuse of the
same rating.
5. Reassemble the yellow continu-
ous power wire’s fuse holder by
placing the wires back inside the
holder then squeezing it together
until it snaps shut.
6. Reassemble the red power wire’s
fuse holder by inserting the fuse
and pushing together and twisting
the two parts until they latch.
7. Reconnect the cable to the vehi-
cle battery’s negative (–) terminal.
12-2152.fm Page 27 Wednesday, July 14, 1999 2:48 PM